Primate Labs Test Subject - 1991 Pickup - Codename: The Raisin

[TacoXpo]

Built a quick n dirty battery tie down. Its pretty much overkill but its not moving.

Did you say dirty? VERY Clean... you know what's missing?

 

[Silverback]

 

[TacoXpo]

 

[Taco Loco]

That not the Tacoma's air filter.

so I can't keep track of what treads I'm on, I'm from CornRow, Texas.

 

[drew02a]

Built a quick n dirty battery tie down. Its pretty much overkill but its not moving.

The battery in the Dilux fell off the tray several times this weekend. Now it's held in place with a length of speaker wire. Your fix is much nicer

 

[Silverback]

Speaker wire... Sprung for the $$ stuff I see. Lol.

The factory mount didnt quite fit the new battery so I had to do something. I have about 20 minutes of time in this one.

 

[drew02a]

Speaker wire... Sprung for the $$ stuff I see. Lol.

The factory mount didnt quite fit the new battery so I had to do something. I have about 20 minutes of time in this one.

The bolt for my factory mount was rusted and snapped off. Also, I think the battery is from an ATV

 

[taco4x4rar]

Speaker wire... Sprung for the $$ stuff I see. Lol.

The factory mount didnt quite fit the new battery so I had to do something. I have about 20 minutes of time in this one.

Not as fancy as the ratchet strap holding mine down, Funny thing is it was only supposed to be a temp fix as for some reason mine was gone when I went to change the battery, a year later and it's still working better than the OEM unit.

 

[Silverback]

Damn! On mine, where the j-hook mounts it's a little rusty (battery acid it appears) so that's the place I'm worried about failing on mine.

 

[Silverback]

Not as fancy as the ratchet strap holding mine down, Funny thing is it was only supposed to be a temp fix as for some reason mine was gone when I went to change the battery, a year later and it's still working better than the OEM unit.

If it's not broken dont fix it.

 

[night_angel]

wow....congratulations for the new Project....

but I would not have changed the 4Runner...

 

[Silverback]

LOL.. it was a tough choice I must admit. I wish I could have kept the 4Runner and had both. But this thing is really a beast.. point and it goes.

 

[Silverback]

Made a very important modification today.

Cooler tie downs.

I need to locate my bungie that holds the lid tight. I also need to strap down the other crap in the bed (straps/HiLift/Fluids)

 

[yotarob]

Good one Sean, very important! I have some D-rings and a rachet strap holding mine down but it's a pain with the strap everytime. I have something in mind but no time to execute before the meet. I still need to properly install my Liquid Caddy's, I have them suction cupped to the vent window for now.

 

[TacoXpo]

Made a very important modification today.

Cooler tie downs.

I need to locate my bungie that holds the lid tight. I also need to strap down the other crap in the bed (straps/HiLift/Fluids)

Sean, you need new stickers!!! Swanky hold downs!! Nice!

 

[Silverback]

Don't I know it! I think I'll just peel that one off.

 

[Taco Loco]

Don't I know it! I think I'll just peel that one off.

just add a "O" and call it good.

 

[TacoXpo]

 

[Silverback]

I decided to just grab another cooler.

Also got to install a CB antenna. Firefly with QD. Bouncing off the ceiling its a little bent.

Also received my hydro lock for the brakes. I think I found a perfect spot it.

 

[Silverback]

Forgot this one.. Cup holders temp installed and the mic holder is in place.