how much? I might be able to find some funds.
Yotarob's 86 4runner build
- Thread starter yotarob
- Start date
yotarob
Kiss My IFS
IT WORKS! My rear window that is. I still have alot of work to do cleaning up my wiring, I didn't run all of the wires nice and neat because I wanted to test everything and have it be easy to trouble shoot. I did not include the limit switches but it seems fine with out them. I am going to try and find a way to post the hand drawn wiring diagram I made to follow so that others can use it, but just taking a picture of it isn't coming out very well. I will also get some pics of the actual wiring up soon.
AlienXtx
Nignog
X2... I did this to make one for Larry
AlienXtx
Nignog
Yeah ill do it, ill pick up your drawing tomorrow maybe.
yotarob
Kiss My IFS
I still have not cleaned up all of the wiring from the rear window job, I will be going back and routing them all cleanly ASAP. Here are the pics of what it looks like currently, pretty much a mess, 
Here is how I mounted the 4 relays.
This is my orginal window switch mounted in the dash, it was a blank, the switch fit perfectly. (not the red switch in the pic, that is my temparary rock light switch)
Here is how I mounted the 4 relays.
This is my orginal window switch mounted in the dash, it was a blank, the switch fit perfectly. (not the red switch in the pic, that is my temparary rock light switch)
SamSter0077
Frack me..
Nice!
yotarob
Kiss My IFS
I got a few small things done this weekend. Mainly cleaned up the wiring to my rear window (PITA) and extended my rear diff breather, still need to do the front.
I did the diff breather using a fitting that Todd found at McMaster Carr. It is a BSPT male to NPT female adapter, with a standard 1/8" NPT to hose barb fitting and the stock breather hose clamped on the end. Running the breather to the gas filler was out of the question for me so I had to get creative and use about 3.7 miles of 3/8" hose. Now that i am looking at the pics, I think I need to move the zip tie on the left over towards the right about 10" or so. It doesn't look like there is enough slack.
I did the diff breather using a fitting that Todd found at McMaster Carr. It is a BSPT male to NPT female adapter, with a standard 1/8" NPT to hose barb fitting and the stock breather hose clamped on the end. Running the breather to the gas filler was out of the question for me so I had to get creative and use about 3.7 miles of 3/8" hose. Now that i am looking at the pics, I think I need to move the zip tie on the left over towards the right about 10" or so. It doesn't look like there is enough slack.
Last edited:
yotarob
Kiss My IFS
So have you already fabbed up the BL spacers?