Yotarob's 86 4runner build

[SamSter0077]

Alright, I am thinking here......I know on a standard 4 pin relay you have 30, 87, 86 and 85. The wire from your horn button is just a signal wire, opposite of it on the relay should be a full time hot. Then #30 (I know for sure) should be a ground, and the other should go the the horn. Can't remember which goes to what, I'll let you know in the AM (when I am sober).

85 & 86 are the control side, and 87 & 30 are the work side..

 

[yotarob]

sliders are tacked in place. What do you think before I burn them in?

 

[yotarob]

85 & 86 are the control side, and 87 & 30 are the work side..

Thanks Sam, could you dumb that down a bit for me? You mean that:

30 - ground
87 - Horn
86 - Signal from horn button
85 - Full time hot

??????

 

[taco4x4rar]

They look level and close enough to the body, burn them on

 

[yotarob]

I am going to bust the tack welds on the plates and pull them back off and weld them on the work bench, so I can still adjust the distance from the body when I weld the plates back to the frame. I think I like it how it is though, hides the frame well and leaves about a little room for flex. It's going to have to wait until late this afternoon, I am playing Mr. mom most of the day. Brandy should be home around 5 or 6.

 

[Silverback]

Sliders look good Rob.

 

[SamSter0077]

Spiders look good!
And, yes your wiring is right assuming the other wire to the horn is always hot.

 

[Taco Loco]

Sliders look good Rob.

Spiders look good!

x 3 Look's Greeaaaarrrrrttttttttttt)Tony the Tiger)

 

[murphyz]

nice did you go with 4x sliders? or are those the ones you got from drew? i can not remember

 

[Anathollo]

Those are the 4x sliders he got from drew.
And from the pics, the sliders placement looks good rob!

 

[drew02a]

Those are the 4x sliders he got from drew.
And from the pics, the sliders placement looks good rob!

Correct, DOM 4x that were on my Taco

 

[yotarob]

Yep, The sliders I got from Drew. They are done and I am happy with them, some of my welds look like shit but I have no doubts that they are solid. I over welded them if anything. Here are all of my pics.

 

[drew02a]

Looks good man. Just in time for HF

Most of my welds looks about the same, but I know it bonded well because I ate up a bunch of the 1/4" steel on the shackle hanger. Somehow I managed not to blow through the frame.

 

[Silverback]

Excellent work as always Rob!

 

[AlienXtx]

bout damn time...

 

[yotarob]

Looks good man. Just in time for HF

Excellent work as always Rob!

Thanks. I need a high Lift to test them. Maybe while we are at camp next weekend I borrow one a see. I bet they won't flex much.

bout damn time...

yeah, yeah. 1 thing at a time.

Now I really need to work on getting my fuel tank skid fixed up and back on. Doesn't look like I am going to have time to throw a rear bumper together.

 

[yotarob]

Got my new camera, looks strikingly like my old one. Here is a little trail damage report from HF.

Filthy! Who wants to clean this bitch for me?

Ripped the passenger side rear veiw mirror off

Busted out my drivers side corner marker light and turn signal. Twisted the bumper some also but that is hardly considered damage, I bent it back a little.

Side shot of the dented in door

 

[Silverback]

Looks good Rob! I broke every light on my 4Runner, some twice in 3 wheeling trips. Get a good front bumper to help protect those corner lights, or do what I finally did.. just pull em out when you wheel.

 

[SamSter0077]

I am amazed I sitll have mine. Took a direct shot with the Raisin, and it came out of the hole.. but still in one piece! Never thought about taking them out though. Good idea except for night wheeling.

Looks better with the dirt on it Rob!

 

[yotarob]

I think I am going to leave the top off and drive it through the car wash, the inside is just as filty as the outside.