Anathollo's build

[Silverback]

Simple & cheap aesthetic mod. This should've come on the Tacoma in the first place.
View attachment 5894 View attachment 5895

What mod is this? Link?

 

[Anathollo]

What mod is this? Link?

Car Air Conditioning Switch Knob Aluminum Panel for Toyota Vios 2002-2006 Black | eBay

 

[Silverback]

cool

 

[Anathollo]

Had to reorder my extra leafs because the Amazon vendor didn't ship them out. It'll be between a week-two weeks before they get here.

And I had to re-reorder my extra leafs from Amazon. I only received one of them. This is the second time UPS has lost my order.

Also ordered new U-bolts for the leaf packs.

 

[Oswego]

And I had to re-reorder my extra leafs from Amazon. I only received one of them. This is the second time UPS has lost my order.

Also ordered new U-bolts for the leaf packs.

so funny it's not funny anymore. Good thing you don't have a hard time limit to get it done.

 

[Anathollo]

so funny it's not funny anymore. Good thing you don't have a hard time limit to get it done.

Yeah, I'm just ready to get started before it gets too damn hot outside to work on the truck.

 

[Anathollo]

Finally received the last Dakar AAL a month and 3 vendors later.

Also got in a new set of U-bolts I purchased from Wheeler's offroad. It's probably time to swap them out.

 

[Anathollo]

Pulled my rear driveshaft off last night. Going to drop it off at a driveshaft shop today to get a new carrier bearing installed. Also going to see how much they'd charge me to install a double cardigan joint.

I finally found the right setup to get the 14mm nuts off the front of the driveshaft. You use a 3/8" long extension, 3/8" ratchet, a thin walled 14mm socket and a cheater pipe. This gives you enough clearance to get at the nut heads to get them off.

 

[Taco Loco]

You going back with oem bearing?

 

[Anathollo]

You going back with oem bearing?

Yeah, going to a double cardigan joint is too expensive to do right now for me.

 

[Taco Loco]

BBK installed yet???

 

[Anathollo]

BBK installed yet???

Nope. Life keeps getting in the way

 

[Taco Loco]

Nope. Life keeps getting in the way

Life is overrated, I'm driving around dangerously on mine until you complete this...Think Safety

 

[Anathollo]

Life is overrated, I'm driving around dangerously on mine until you complete this...Think Safety

you and me both

Edit: It's also been delayed due to the fact that once I take the front end apart, I want to service a whole bunch of stuff on the front. So I could do this swap in a few hours but I want to do a whole bunch of stuff at the same time as well.

 

[Anathollo]

Rear driveshaft is reinstalled. Thanks to @thekidcatcher for a life changing trick when installing it.

I also think I have a pulley that is starting to go out and squeal as well.

 

[Taco Loco]

you and me both.

Well, I've been driving the F150screw, for the last 5 weeks mostly, AC seats and comfy ride.

 

[Anathollo]

Well, I've been driving the F150screw, for the last 5 weeks mostly, AC seats and comfy ride.

I've been driving the F250 for the past couple of weeks. Semi ok A/C, meh seats and rides like an old couch

 

[balakay]

Speaking of AC. I can't figure out what's up with mine. One of the 4 vents in the front blows cold as fuck. The other 3 blow quite a bit warmer.

 

[Anathollo]

Installed new Wet Okole seat covers on the rear seats. So glad I finally was able to get those. Makes the truck alot nicer.
Finally made a mount for my rear 4 channel amp so now it's mounted solid.

 

[Anathollo]

Installed the 4Runner brake kit. Only drove a few miles and seems to brake fine. I had to notch the dust shields to fit around my spindle gusset. These calipers will only work with 17"+ size rims.