Drew02a 1991 4Runner, Long Travel Build

[drew02a]

looks good tanto

Werd. Rolling sooner than later

 

[thekidcatcher]

awesome man. we can baja the ranch roads

 

[drew02a]

This evening, I relocated the rear window switch from the gear shifter surround to the dash on the driver side. Also power ran wires for my HAM radio and CB. Planning to run the antenna wires tomorrow when I have more light and then I'll give them both a test.

 

[Mauzer]

Ok, whats left?

Slider welding party then bumper building party FTW!

 

[Silverback]

Come on up... I've got a bender.

 

[drew02a]

Ok, whats left?

For drivability:
Buy and install a new alternator
Buy and install front shocks

For offroading:
Finish modifying my front driveshaft. Need to buy new U-Joints then put it back together
Weld on my Sliders

 

[taco4x4rar]

For drivability:
Buy and install a new alternator
Buy and install front shocks

For offroading:
Finish modifying my front driveshaft. Need to buy new U-Joints then put it back together
Weld on my Sliders

Get on it the clocks ticking, and what dimension shocks do you need I've got some laying around

 

[Mauzer]

I thought we trashed your front bumper at Longs or something?

 

[drew02a]

Get on it the clocks ticking, and what dimension shocks do you need I've got some laying around

Gonna do some 9.5" 5125s. I'd have to look up the exact dimensions. They're somewhere in this thread.

 

[drew02a]

I thought we trashed your front bumper at Longs or something?

Trashed? No... Modified? Yes

 

[taco4x4rar]

Gonna do some 9.5" 5125s. I'd have to look up the exact dimensions. They're somewhere in this thread.

Eye-eye or do you still have the eye+pin up front. This is what I plan to use when I replace mine cheap and everything I've read on pirate puts them on par with the 51xx series shocks at least for leaf sprung rigs
http://www.pirate4x4.com/forum/9679632-post36.html

 

[drew02a]

eye to eye

 

[taco4x4rar]

eye to eye

Eh don't have any short enough then all of mine are 12s and 14s

 

[drew02a]

I took advantage of the cold weather and got a little work done on this thing

Gear drive transfer case was leaking pretty bad from the rear output shaft. So I pulled it off and hit it with a bunch of RTV.

Also, chopped and rewelded the shifter so it wouldn't interfere with changing gears.

 

[taco4x4rar]

I took advantage of the cold weather and got a little work done on this thing

Gear drive transfer case was leaking pretty bad from the rear output shaft. So I pulled it off and hit it with a bunch of RTV.

Also, chopped and rewelded the shifter so it wouldn't interfere with changing gears.

Inchworm adapter? They're having issues with bearings
http://ttora.com/forum/showthread.php?t=198933&page=4

 

[drew02a]

I bought from Marlin, but it is an Inchworm adapter plate

 

[Silverback]

When are we wheeling this fucker? Inquiring minds want to know. <smiley here>

 

[taco4x4rar]

When are we wheeling this fucker? Inquiring minds want to know. <smiley here>

Shhh you bringing the Apocalypse faster

 

[SamSter0077]

win the Texans win the superbowl?

 

[drew02a]

Hell has frozen over... I finally had a successful test drive today, and am planning on wheeling at Long Ranch or Hidden falls on the Saturday after Christmas