So drinking it would send me to heaven?
Drew02a 1991 4Runner, Long Travel Build
- Thread starter drew02a
- Start date
So if I'm removing the heater, can I just terminate both lines, or do I need to keep a loop?
Is it something I should do myself? I think the freon needs recharging anyway since the AC won't get cold. Might be because of the leak.
Okay, how do I know if it's been converted?
AlienXtx
Nignog
Look for a lil green tag that says so, it should be on upper core support or on the acumulator.
License Plate Wiring
Got some work done wiring for the license plate light. I wanted to run the wiring through the tire carrier tubing. It was a huge pain in the ass.
I drilled the first hole too close to the weld. Aparrently, the hinge piece is inserted into the tubing then welded.
I tapped along the tubing until the tone change and drilled a second hole. Dead on...
Here's the first hole I drilled for the wiring to exit. I thought I could use a vacuum to suck a piece of string through, but that didn't work out.
3hrs later after drilling a bigger hole, I was able to grab the string with some tweezers that I had to modify in the bench vise.
Ran the wiring out above the tail light. I think I'm gonna use some smaller zip ties.
Ready to finish another day. I only ran one wire since the carrier is grounded.
Got some work done wiring for the license plate light. I wanted to run the wiring through the tire carrier tubing. It was a huge pain in the ass.
I drilled the first hole too close to the weld. Aparrently, the hinge piece is inserted into the tubing then welded.
I tapped along the tubing until the tone change and drilled a second hole. Dead on...
Here's the first hole I drilled for the wiring to exit. I thought I could use a vacuum to suck a piece of string through, but that didn't work out.
3hrs later after drilling a bigger hole, I was able to grab the string with some tweezers that I had to modify in the bench vise.
Ran the wiring out above the tail light. I think I'm gonna use some smaller zip ties.
Ready to finish another day. I only ran one wire since the carrier is grounded.
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
I can see you dragging the vacuum out into the garage and your wife watching wondering just WTF you are up too. 
She wasn't home when I took it out there. Just meant I got the look when I brought it back in instead.I can see you dragging the vacuum out into the garage and your wife watching wondering just WTF you are up too.
It's at work right now
I don't knoe yet. Gonna be sticking that diff in tonight if you wanna hang.
Just pulled the third out of this old axle. The ring gear says 3.9... Taco, say hello to front dig,
. Maybe Randy will trade me for one of his 3.73 3rds.
taco4x4rar
Well-Known Member
I don't knoe yet. Gonna be sticking that diff in tonight if you wanna hang.
Just pulled the third out of this old axle. The ring gear says 3.9... Taco, say hello to front dig,
Wha? send me a pic of the ring gear no 3.9 ratio exists that I know of. That and that looks like a spring over axle? They told me it was out of a 2wd truck (should have been spring under)
Mauzer
Pitter Patter. Lets Get at Er
I think its upside down (look at the lines going to the wheel cylinders and diff plug)? meaning those perches would be on the bottom