Fridge Freezers
- Thread starter TacoXpo
- Start date
TacoXpo
HOAX DENIER
You are very welcome! You only need some hook tape for your fridge.
TacoXpo
HOAX DENIER
Experimenting with mounting options...
The first "hook" - I may rework this one so that it sits wider, like the one below. Also note the different "layering" of the steel. The 2x4 is just for mocking it up, I will probably have a cleaner ledge to make it level and keep the air gap constant for the condenser fan.
This inner eyebolt was a bitch to work around the crossmember. (Stainless hardware including eyebolt)
This one (passenger) was a bitch too as I found that it was double wall. I am going to clean up this hole and use a body plug (to keep it 'water tight' while allowing it to be serviceable.
This is the second "hook" I fabbed. I think it's a bit cleaner. Speaking of clean, I need to clean that carpet!!!
The first "hook" - I may rework this one so that it sits wider, like the one below. Also note the different "layering" of the steel. The 2x4 is just for mocking it up, I will probably have a cleaner ledge to make it level and keep the air gap constant for the condenser fan.
This inner eyebolt was a bitch to work around the crossmember. (Stainless hardware including eyebolt)
This one (passenger) was a bitch too as I found that it was double wall. I am going to clean up this hole and use a body plug (to keep it 'water tight' while allowing it to be serviceable.
This is the second "hook" I fabbed. I think it's a bit cleaner.
Speaking of clean, I need to clean that carpet!!!
Last edited:
I do like the idea and layering of the bottom restraint. That is a good idea for restraining the fridge though.
TacoXpo
HOAX DENIER
Thanks but not sure I understand. You mean the 2x4 or the metal strapping?
Last edited:
TacoXpo
HOAX DENIER
Copy - thanks. I was going to use bar but I wanted to distribute the force. Thinking about 'rubberizing' the hooks.
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
I have some yellow Plastiderp I can send you? Thanks @tx_shooter for gifting it to me. #bastard
Still new in the can.
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
Experimenting with mounting options...
The first "hook" - I may rework this one so that it sits wider, like the one below. Also note the different "layering" of the steel. The 2x4 is just for mocking it up, I will probably have a cleaner ledge to make it level and keep the air gap constant for the condenser fan.
View attachment 6848
This inner eyebolt was a bitch to work around the crossmember. (Stainless hardware including eyebolt)
View attachment 6849
This one (passenger) was a bitch too as I found that it was double wall. I am going to clean up this hole and use a body plug (to keep it 'water tight' while allowing it to be serviceable. View attachment 6850
This is the second "hook" I fabbed. I think it's a bit cleaner.
View attachment 6851
Speaking of carpet. I bought the little one an orange Fanta in glass bottle at Home Depot several months ago. She set it on the curved plastic that is below the seats (passenger side rear seat is out and the fridge is there so there is a couple inches between them.. an area she could set the bottle. I pulled forward and it tipped over... dumping all the contents somewhere. Got home and pulled the seat up and I have no idea where the soda went. No carpet stains, no smells but its gone. LOL Now if I fast forward to the next time I have to pull the interior I am sure I will find it.
TacoXpo
HOAX DENIER
SureI have some yellow Plastiderp I can send you? Thanks @tx_shooter for gifting it to me. #bastard
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
Send me the addy where you want it sent.