What have you done to your ride lately?

TacoXpo

HOAX DENIER
Sean, don't feel bad, the rear pass bushing on my rear leaf is gone too!! lol I have some synergy replacements but I need to redo the exhust before I fix it. Right now I have EBC Green stuff and Toyota Discs staring at me. :)
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Well I got the bushings replaced. Had to heat up the mounts a bit to bend them back into place. It was a little sketchy, truck on roller skates and using a hi-lift to get pressure off the mounts. I had to roll it back under the jack a couple times. But its all done and I still have all my fingers. So its about ready, time to focus on the trailer. I am thinking about relocating the CB though, its between the seats on the back wall and its damn near impossible to operate. Also, the thing never overheated but the radiator fins are plugged with mud and I have a brand new one sitting around, along with the silicone hoses.. now to just find those items and put that in the plan.
 

balakay

BabyMax
Sean, don't feel bad, the rear pass bushing on my rear leaf is gone too!! lol I have some synergy replacements but I need to redo the exhust before I fix it. Right now I have EBC Green stuff and Toyota Discs staring at me. :)

Do you still have the pig? Seems like it's been neglected longer than my runner.
 

TacoXpo

HOAX DENIER

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Thats some magic buffing compound! Looks great.


Well I ordered up some Ballistic rod ends http://www.ballisticfabrication.com/Forged-Ballistic-Rod-End_p_1786.html The plan is to link the rear of the trail rig first... push the rear back about 6". Then do the front. So its time to start collecting parts. Not sure what I'm going to do for the front mounts.. my fuel cell is sorta in the way so I need to finger that out.
 

Taco Loco

Tired and Lazy, married to ‘The Laundry Fairy’
Leveled my front bumper finally and installed a Deck Tech, that and buffed out some scratches acquired from a slight fender bender.

Texting and driving is bad. Spooning and Driving is worse, unless your a really great buffer.
 

balakay

BabyMax

yotarob

Kiss My IFS
I welded up a bed rack and got my RTT mounted. Still working on a stand that will bolt to the floor of my small trailer for the bed rack / RTT combo to sit on. I don't plan on putting the bed rack / tent on my truck very often but wanted to have the option.







 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Looks good Rob. Are you starting on a fab table?
 

yotarob

Kiss My IFS
No but I sure as hell need a fab table, I hate crawling around on the ground and getting up & down. My knees and back hurt today.

The bed rack is supposed to sit inside of that frame. It's a stand that I am going to bolt into my little trailer. It will make more sense when it's done, lol
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Ahhh it makes sense, I saw that picture with it on the trailer. Forgot that's what it was.
 

Anathollo

Armorall is my choice of lube
Staff member
Thats some magic buffing compound! Looks great.


Well I ordered up some Ballistic rod ends http://www.ballisticfabrication.com/Forged-Ballistic-Rod-End_p_1786.html The plan is to link the rear of the trail rig first... push the rear back about 6". Then do the front. So its time to start collecting parts. Not sure what I'm going to do for the front mounts.. my fuel cell is sorta in the way so I need to finger that out.

36243-slow-clap-citizen-kane-orson-w-mr03.gif
 

Anathollo

Armorall is my choice of lube
Staff member
bedrack looks awesome Rob!
 

Boomtacoma01

Tommy want wingy..
Is that the tent that Todd won?


Sent from my iPhone using Tapatalk
 

yotarob

Kiss My IFS
Yes it is. He made me a hell of a deal on it and I couldn't pass it up. We camp ALOT as a family, mostly state parks but at least one weekend a month. It will get plenty of use.
 
Last edited:
Top