What have you done to your ride lately?

TacoXpo

HOAX DENIER
No idea but I'm also impressed by the damage to the carrier!
 

DemonSpeedn

You talking to me?
Yesterday I pulled out the power seats from the LC and replaced them with manual ones I picked up at the yard, great find I think same color, leather is intact and undamaged, a little greasing of the rails, and they fit perfectly. Did have to pull the seat belt clip off the power seats and find a place to mount them to these. Found the solution and i'm good to go.

Wish I didn't feel like shit today I could've done more, slept all damn day.
 

BrutalGuyRacing

Well-Known Member
and DONE
013-1.jpg

010-4.jpg

007-4.jpg
 

TacoXpo

HOAX DENIER

drew02a

Moderator
Staff member
Okay, so Eric and I changed out the fuel injector on cylinder #4 today. Turned it over and it's still spraying a bunch of gas. Not sure it it's because there's still a problem, or if all the fuel that's spraying out is still from before. Used a rubber hose to syphon some out then left the cylinder open so that hopefully the rest evaporates. Will try it again tomorrow.
 

tex

That's Mr Asshole to you
Okay, so Eric and I changed out the fuel injector on cylinder #4 today. Turned it over and it's still spraying a bunch of gas. Not sure it it's because there's still a problem, or if all the fuel that's spraying out is still from before. Used a rubber hose to syphon some out then left the cylinder open so that hopefully the rest evaporates. Will try it again tomorrow.

I don't know much about how those motors are set up but what about the fuel injection computer or maybe there is a clog(s) in the fuel line and only letting fuel to cylinder 4? Fuel pressure regulator?
 

drew02a

Moderator
Staff member
I don't know much about how those motors are set up but what about the fuel injection computer or maybe there is a clog(s) in the fuel line and only letting fuel to cylinder 4? Fuel pressure regulator?

I unplugged the harness from that injector, and still was spraying out. Which means theres a clog in the rail or one of the injectors if it's not just the gas that was in there from before
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
so you have plenty of gas.. how about spark?

3 things make a motor turn.. gas, spark and air. Assuming you have plenty of air (in correctly metered volumes) and the gas is there.. how much is YTBD.. but how about spark?
 

drew02a

Moderator
Staff member
so you have plenty of gas.. how about spark?

3 things make a motor turn.. gas, spark and air. Assuming you have plenty of air (in correctly metered volumes) and the gas is there.. how much is YTBD.. but how about spark?

Have spark

It's the excessive amounts of gas. It to rich to combust and is just getting dumped into the exhaust
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
hmm..did you check the gas coming into the other injectors? Anything coming out? Like you said, maybe one of them is just clogged. Shitty thing fucking with injectors. keep Mr Fire Extinguisher close by.
 

drew02a

Moderator
Staff member
hmm..did you check the gas coming into the other injectors? Anything coming out? Like you said, maybe one of them is just clogged. Shitty thing fucking with injectors. keep Mr Fire Extinguisher close by.

If it's still spewing gas tomorrow, I'll pull the rail all the way out and watch the gas come out of each injector while I turn it over
 

DemonSpeedn

You talking to me?
I don't know much about how those motors are set up but what about the fuel injection computer or maybe there is a clog(s) in the fuel line and only letting fuel to cylinder 4? Fuel pressure regulator?

I was thinking the same thing.

If it's still spewing gas tomorrow, I'll pull the rail all the way out and watch the gas come out of each injector while I turn it over

Pick one of these up
images
 

drew02a

Moderator
Staff member
Just unplugged the battery and will leave it that way till this evening so the ECU resets. If that doesn't fix it, then it I'll check the wiring continuity and if that ain't it, might be buying a new ECU.

I've had a slight ping in the engine since I bought it that I haven't been able to get rid of. This might be the culprit. Thought I was just hearing bad ujoints or something, but I checked those while I was under the truck yesterday and they're solid.
 
Top